From: n9ads@juno.com (Howard R Pletcher)

Date: Wed, 23 Apr 1997 16:49:23 EDT



Subject: Transmission Codes and Ratios



Here's an update on Scout Transmissions and ratios to answer some of the questions that have been asked.



 












































































IH Code Vendor and Model When Used
13013 or T-13 Warner Gear T-90, 3 Speed, 2WD same as T-14
13014 or T-14 Warner Gear T-90, 3 Speed

1=3.34, 2=1.85, 3=1.00, Rev=4.53		 Scout 80, 800, and II thru '74
13039 or T-39 Borg Warner 11 Automatic Scout 800 and II thru '72
13044 or T-44 Warner Gear T-18C, 2 WD same as T-45
13045 or T-45 Warner Gear T-18C, 4 Speed

1=4.02, 2=2.41, 3=1.41, 4=1.00, Rev=4.73		 Scout 800 and II thru '75
  (A wide ratio T-18 was never offered in the Scout)  
13332 or T-332 Warner Gear T-15D, 3 Speed, Synchro low,

1=2.997, 2=1.55, 3= 1.00, Rev=2.997		 '75 and later
13407 or T-407 Chrysler A727 Automatic,

Low=2.45, D1=1.45, D2=1.00, Rev=2.20		 '73 and later
13427 or T-427 Warner Gear T-19, 4 Speed Wide Ratio, Synchro Low

1=6.32, 2=3.09, 3=1.68, 4=1.00, Rev=6.96		 '75 & on
  Yes, both the T-18 and the T-19 were available in '75  
464-420-C91 Wide T19 Casting #  
13428 or T-428 Warner Gear T-19A, 4 Speed Close Ratio Synchro Low,

1=4.02, 2=2.41, 3=1.41, 4=1.00, Rev=4.42		 '75 & on
464-421-C91 Close T19 Casting #  


 


























13143 or TC-143 IH Chain Drive Transfer Case-Single Speed, Scout II  
13144 or TC-144 Dana Model 18, Scout 80

Low=2.46		  
13145 or TC-145 Dana Model 20, Scout 800 and II,

Low=2.00		  
13146 or TC-146 Dana Model 300, 1980 Scout II,

Low=2.62