|
DCP_0087
Date: 11/21/2011
Views: 2305
|
2011-11-27_15-47-36_752
Heaviest rod combo at 1858. Others were 1835-1840g.
Date: 11/27/2011
Views: 2192
|
2011-11-27_16-31-49_519
Couple of pistons installed. CoolWhip container of oil for oiling the bearings and the piston/rings before installation.
Date: 11/27/2011
Views: 2156
|
|
2011-11-27_17-30-43_487
Finding TDC and checking deck clearance. .017" out of the deck on this hole. Gasket is either .038 or .042, so that still leaves about 0.020" before the piston hits the head.
Date: 11/27/2011
Views: 2032
|
2011-11-27_17-34-05_569
Flipped back over for plastigage application / bearing clearance checking.
Date: 11/27/2011
Views: 2049
|
CamCard
Camshaft Specifications / cam card
Date: 01/08/2012
Views: 7053
|
