|
New pogo-sticks in the form of Bilstein 7100 Remote Reservoir shocks
New pogo-sticks in the form of Bilstein 7100 Remote Reservoir shocks
Date: 12/31/1969
Views: 522
|
New pogo-sticks in the form of Bilstein 7100 Remote Reservoir shocks
New pogo-sticks in the form of Bilstein 7100 Remote Reservoir shocks
Date: 12/31/1969
Views: 707
|
Starting work on new axle end shock mounts by taking a piece of 4" wide .250" plate and hole-sawing it.
Starting work on new axle end shock mounts by taking a piece of 4" wide .250" plate and hole-sawing it.
Date: 12/31/1969
Views: 736
|
Then band-saw it
Then band-saw it
Date: 12/31/1969
Views: 626
|
DCP_0005.JPG
DCP_0005.JPG
Date: 12/31/1969
Views: 618
|
|
To make 4 half plates with a half-moon cut from each.
To make 4 half plates with a half-moon cut from each.
Date: 12/31/1969
Views: 748
|
DCP_0007.JPG
DCP_0007.JPG
Date: 12/31/1969
Views: 581
|
Dimple in the end-cap is from Chris Brown's slight tap
Dimple in the end-cap is from Chris Brown's slight tap
Date: 12/31/1969
Views: 614
|
Trial fitting the shocks and new mounts - the yellow 5100s will be going to the rear
Trial fitting the shocks and new mounts - the yellow 5100s will be going to the rear
Date: 12/31/1969
Views: 661
|
Trial fitting the shocks and new mounts - the yellow 5100s will be going to the rear
Trial fitting the shocks and new mounts - the yellow 5100s will be going to the rear
Date: 12/31/1969
Views: 447
|
|
Trial fitting the shocks and new mounts - the yellow 5100s will be going to the rear
Trial fitting the shocks and new mounts - the yellow 5100s will be going to the rear
Date: 12/31/1969
Views: 826
|
Trial fitting the shocks and new mounts - the yellow 5100s will be going to the rear
Trial fitting the shocks and new mounts - the yellow 5100s will be going to the rear
Date: 12/31/1969
Views: 656
|
One coat of ZR on the fiberglass quarter
One coat of ZR on the fiberglass quarter
Date: 12/31/1969
Views: 707
|
One coat of ZR on the fiberglass quarter
6/15
One coat of ZR on the fiberglass quarter
6/15
Date: 12/31/1969
Views: 752
|
DCP_0003.JPG
DCP_0003.JPG
Date: 12/31/1969
Views: 879
|
|
Third coat of ZR on, 6/15. Shows the upper quarter 'capturing" mechanism.
Third coat of ZR on, 6/15. Shows the upper quarter 'capturing" mechanism.
Date: 12/31/1969
Views: 995
|
Third coat of ZR on, 6/15. Shows the upper quarter 'capturing" mechanism.
Third coat of ZR on, 6/15. Shows the upper quarter 'capturing" mechanism.
Date: 12/31/1969
Views: 830
|
Beginnings of my new rear shock mounts. You can see the old shock location in the picture as well.
Beginnings of my new rear shock mounts. You can see the old shock location in the picture as well.
Date: 12/31/1969
Views: 825
|
I'll weld two pieces of 2x.250" strap to this plate, approximiately 7" long, with the strap overhanging to the front a
I'll weld two pieces of 2x.250" strap to this plate, approximiately 7" long, with the strap overhanging to the front a bit, and running to the very rear of the U-bolt plate. This will leave room for one shock mounted hanging off the front of th
Date: 12/31/1969
Views: 1058
|
Done for the night
Done for the night
Date: 12/31/1969
Views: 474
|
|
4 coats of ZR later, the morning (6/16) after.. still needs 3 coats of clear.
4 coats of ZR later, the morning (6/16) after.. still needs 3 coats of clear.
Date: 12/31/1969
Views: 612
|
dcp_0001.jpg
dcp_0001.jpg
Date: 12/31/1969
Views: 470
|
dcp_0002.jpg
dcp_0002.jpg
Date: 12/31/1969
Views: 730
|
dcp_0003.jpg
dcp_0003.jpg
Date: 12/31/1969
Views: 452
|
dcp_0004.jpg
dcp_0004.jpg
Date: 12/31/1969
Views: 476
|
