|
DCP_0137
Welded in place
Date: 02/18/2012
Views: 1292
|
DCP_0139
Duraspark base plate notched
Date: 02/18/2012
Views: 1221
|
DCP_0139
Vac advance lock-out. 6/32 screw with a nut above and below, with red loctite. Rivet was drilled out.
Date: 02/18/2012
Views: 1146
|
|
DCP_0140
Vac advance lock-out. 6/32 screw with a nut above and below, with red loctite. Rivet was drilled out.
Date: 02/18/2012
Views: 1282
|
DCP_0141
Base plate installed
Date: 02/18/2012
Views: 1240
|
DCP_0142
Base plate installed
Date: 02/18/2012
Views: 1299
|
|
DCP_0143
Base plate installed
Date: 02/18/2012
Views: 1386
|
DCP_0144
Non-blurry picture of the base plate installed. Vac advance disable screw on the right
Date: 02/18/2012
Views: 1382
|
DCP_0145
Reluctor in place. Mark on distributor body is where the contact is on the cap, where the rotor points with the "windowed" cap in place.
Date: 02/18/2012
Views: 1281
|
