Login
Gallery 1974 Travelette IH 5spd Building the 74/75 transmission mount
Advanced Search
RSS Feed for this Album View Slideshow View Slideshow (Fullscreen)

IH 5spd

1. MTD 16.5hp ... ... 14. Mark... 15. Mark... 16. Mark... 17. Mark... 18. Mark... 19. Mark... 20. Building...

Building the 74/75 transmission mount

Date: 05/03/2004
Size: 94 items
first previous
"Raised" shifter boot area - far from perfection, but functional

"Raised" shifter boot area - far from perfection, but functional

"Raised" shifter boot area - far from perfection, but functional

Date: 12/31/1969
Views: 5389
Shifter was notched in one place with a grinder until I cut enough and got it hot enough to finish bending, then re-welded. This

Shifter was notched in one place with a grinder until I cut enough and got it hot enough to finish bending, then re-welded. This

Shifter was notched in one place with a grinder until I cut enough and got it hot enough to finish bending, then re-welded. This is in 1st gear

Date: 12/31/1969
Views: 1910
Reverse

Reverse

Reverse

Date: 12/31/1969
Views: 7571
2nd gear

2nd gear

2nd gear

Date: 12/31/1969
Views: 955
5th gear

5th gear

5th gear

Date: 12/31/1969
Views: 888
Clearance hole for the slave cylinder is still unfinished

Clearance hole for the slave cylinder is still unfinished

Clearance hole for the slave cylinder is still unfinished

Date: 12/31/1969
Views: 1545
Looking forward after lowering the transmission mount

Looking forward after lowering the transmission mount

Looking forward after lowering the transmission mount

Date: 12/31/1969
Views: 1267
PTO clearance

PTO clearance

PTO clearance

Date: 12/31/1969
Views: 1521
More PTO clearance

More PTO clearance

More PTO clearance

Date: 12/31/1969
Views: 1645
Driveshaft to floor clearance

Driveshaft to floor clearance

Driveshaft to floor clearance

Date: 12/31/1969
Views: 887
Driveshaft to floor clearance - note the rub mark on the driveshaft from just 10 miles.

Driveshaft to floor clearance - note the rub mark on the driveshaft from just 10 miles.

Driveshaft to floor clearance - note the rub mark on the driveshaft from just 10 miles.

Date: 12/31/1969
Views: 956
DCarrier bearing view

DCarrier bearing view

DCarrier bearing view

Date: 12/31/1969
Views: 875
DCP_0007.JPG

DCP_0007.JPG

DCP_0007.JPG

Date: 12/31/1969
Views: 1197
Rear dump headers, driver's side

Rear dump headers, driver's side

Rear dump headers, driver's side

Date: 12/31/1969
Views: 949
IFS front suspension, looking forward from under the truck

IFS front suspension, looking forward from under the truck

IFS front suspension, looking forward from under the truck

Date: 12/31/1969
Views: 2000
Looking to the rear, starting at approximately the carrier bearing crossmember.  Passenger muffler cut off and mid-replacement

Looking to the rear, starting at approximately the carrier bearing crossmember. Passenger muffler cut off and mid-replacement

Looking to the rear, starting at approximately the carrier bearing crossmember. Passenger muffler cut off and mid-replacement

Date: 12/31/1969
Views: 1160
Starter, with starter wire re-routed UNDER the frame and outboard

Starter, with starter wire re-routed UNDER the frame and outboard

Starter, with starter wire re-routed UNDER the frame and outboard

Date: 12/31/1969
Views: 1741
Another look at the header

Another look at the header

Another look at the header

Date: 12/31/1969
Views: 1916
2012-09-26_19-55-15_181.jpg

2012-09-26_19-55-15_181.jpg

Date: 09/26/2012
Views: 1957
 
first previous
Page: 1 2 3 4
Advanced Search
Powered by Gallery v2.3