|
dcp_0012.jpg
dcp_0012.jpg
Date: 12/31/1969
Views: 967
|
dcp_0013.jpg
dcp_0013.jpg
Date: 12/31/1969
Views: 836
|
dcp_0014.jpg
dcp_0014.jpg
Date: 12/31/1969
Views: 879
|
dcp_0015.jpg
dcp_0015.jpg
Date: 12/31/1969
Views: 969
|
dcp_0016.jpg
dcp_0016.jpg
Date: 12/31/1969
Views: 786
|
|
dcp_0017.jpg
dcp_0017.jpg
Date: 12/31/1969
Views: 1031
|
dcp_0018.jpg
dcp_0018.jpg
Date: 12/31/1969
Views: 783
|
5/6/2004 - drilled the holes to mount the plate
5/6/2004 - drilled the holes to mount the plate
Date: 12/31/1969
Views: 852
|
5/6/2004 - drilled the holes to mount the plate
5/6/2004 - drilled the holes to mount the plate
Date: 12/31/1969
Views: 1017
|
Bandsaw cutting the 5"x3/8" plate to make the "L" step
Bandsaw cutting the 5"x3/8" plate to make the "L" step
Date: 12/31/1969
Views: 931
|
|
Bandsaw cutting the 5"x3/8" plate to make the "L" step
Bandsaw cutting the 5"x3/8" plate to make the "L" step
Date: 12/31/1969
Views: 1043
|
Test fitting
Test fitting
Date: 12/31/1969
Views: 1015
|
After welding the "L" to the main mounting bracket
After welding the "L" to the main mounting bracket
Date: 12/31/1969
Views: 864
|
After welding the "L" to the main mounting bracket
After welding the "L" to the main mounting bracket
Date: 12/31/1969
Views: 943
|
After welding the "L" to the main mounting bracket
After welding the "L" to the main mounting bracket
Date: 12/31/1969
Views: 877
|
|
Test fit with the "L" welded in place. I deviated from a direct factory duplicate by grinding the relief for the drai
Test fit with the "L" welded in place. I deviated from a direct factory duplicate by grinding the relief for the drain plug
Date: 12/31/1969
Views: 1002
|
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
Date: 12/31/1969
Views: 860
|
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
Date: 12/31/1969
Views: 668
|
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
Date: 12/31/1969
Views: 1207
|
Painted up
Painted up
Date: 12/31/1969
Views: 6015
|
|
Painted
Painted
Date: 12/31/1969
Views: 1020
|
The crossmembers, after their second coat of ZeroRust, this time Black
The crossmembers, after their second coat of ZeroRust, this time Black
Date: 12/31/1969
Views: 1034
|
The crossmembers, after their second coat of ZeroRust, this time Black
The crossmembers, after their second coat of ZeroRust, this time Black
Date: 12/31/1969
Views: 2376
|
Crossmember pic courtesy Dan Phariss
Crossmember pic courtesy Dan Phariss
Date: 05/14/2004
Views: 599
|
Flywheel requires a change in pilot bearing for the 5spd
Flywheel requires a change in pilot bearing for the 5spd
Date: 12/31/1969
Views: 1715
|
