|
dcp_0012.jpg
dcp_0012.jpg
Date: 12/31/1969
Views: 837
|
dcp_0013.jpg
dcp_0013.jpg
Date: 12/31/1969
Views: 706
|
dcp_0014.jpg
dcp_0014.jpg
Date: 12/31/1969
Views: 744
|
dcp_0015.jpg
dcp_0015.jpg
Date: 12/31/1969
Views: 830
|
dcp_0016.jpg
dcp_0016.jpg
Date: 12/31/1969
Views: 656
|
|
dcp_0017.jpg
dcp_0017.jpg
Date: 12/31/1969
Views: 902
|
dcp_0018.jpg
dcp_0018.jpg
Date: 12/31/1969
Views: 652
|
5/6/2004 - drilled the holes to mount the plate
5/6/2004 - drilled the holes to mount the plate
Date: 12/31/1969
Views: 712
|
5/6/2004 - drilled the holes to mount the plate
5/6/2004 - drilled the holes to mount the plate
Date: 12/31/1969
Views: 884
|
Bandsaw cutting the 5"x3/8" plate to make the "L" step
Bandsaw cutting the 5"x3/8" plate to make the "L" step
Date: 12/31/1969
Views: 799
|
|
Bandsaw cutting the 5"x3/8" plate to make the "L" step
Bandsaw cutting the 5"x3/8" plate to make the "L" step
Date: 12/31/1969
Views: 898
|
Test fitting
Test fitting
Date: 12/31/1969
Views: 881
|
After welding the "L" to the main mounting bracket
After welding the "L" to the main mounting bracket
Date: 12/31/1969
Views: 738
|
After welding the "L" to the main mounting bracket
After welding the "L" to the main mounting bracket
Date: 12/31/1969
Views: 809
|
After welding the "L" to the main mounting bracket
After welding the "L" to the main mounting bracket
Date: 12/31/1969
Views: 739
|
|
Test fit with the "L" welded in place. I deviated from a direct factory duplicate by grinding the relief for the drai
Test fit with the "L" welded in place. I deviated from a direct factory duplicate by grinding the relief for the drain plug
Date: 12/31/1969
Views: 860
|
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
Date: 12/31/1969
Views: 723
|
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
Date: 12/31/1969
Views: 537
|
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
Date: 12/31/1969
Views: 1011
|
Painted up
Painted up
Date: 12/31/1969
Views: 5819
|
|
Painted
Painted
Date: 12/31/1969
Views: 862
|
The crossmembers, after their second coat of ZeroRust, this time Black
The crossmembers, after their second coat of ZeroRust, this time Black
Date: 12/31/1969
Views: 870
|
The crossmembers, after their second coat of ZeroRust, this time Black
The crossmembers, after their second coat of ZeroRust, this time Black
Date: 12/31/1969
Views: 2175
|
Crossmember pic courtesy Dan Phariss
Crossmember pic courtesy Dan Phariss
Date: 05/14/2004
Views: 474
|
Flywheel requires a change in pilot bearing for the 5spd
Flywheel requires a change in pilot bearing for the 5spd
Date: 12/31/1969
Views: 1509
|
