|
dcp_0012.jpg
dcp_0012.jpg
Date: 12/31/1969
Views: 919
|
dcp_0013.jpg
dcp_0013.jpg
Date: 12/31/1969
Views: 789
|
dcp_0014.jpg
dcp_0014.jpg
Date: 12/31/1969
Views: 829
|
dcp_0015.jpg
dcp_0015.jpg
Date: 12/31/1969
Views: 914
|
dcp_0016.jpg
dcp_0016.jpg
Date: 12/31/1969
Views: 737
|
|
dcp_0017.jpg
dcp_0017.jpg
Date: 12/31/1969
Views: 986
|
dcp_0018.jpg
dcp_0018.jpg
Date: 12/31/1969
Views: 738
|
5/6/2004 - drilled the holes to mount the plate
5/6/2004 - drilled the holes to mount the plate
Date: 12/31/1969
Views: 802
|
5/6/2004 - drilled the holes to mount the plate
5/6/2004 - drilled the holes to mount the plate
Date: 12/31/1969
Views: 970
|
Bandsaw cutting the 5"x3/8" plate to make the "L" step
Bandsaw cutting the 5"x3/8" plate to make the "L" step
Date: 12/31/1969
Views: 883
|
|
Bandsaw cutting the 5"x3/8" plate to make the "L" step
Bandsaw cutting the 5"x3/8" plate to make the "L" step
Date: 12/31/1969
Views: 983
|
Test fitting
Test fitting
Date: 12/31/1969
Views: 969
|
After welding the "L" to the main mounting bracket
After welding the "L" to the main mounting bracket
Date: 12/31/1969
Views: 817
|
After welding the "L" to the main mounting bracket
After welding the "L" to the main mounting bracket
Date: 12/31/1969
Views: 893
|
After welding the "L" to the main mounting bracket
After welding the "L" to the main mounting bracket
Date: 12/31/1969
Views: 818
|
|
Test fit with the "L" welded in place. I deviated from a direct factory duplicate by grinding the relief for the drai
Test fit with the "L" welded in place. I deviated from a direct factory duplicate by grinding the relief for the drain plug
Date: 12/31/1969
Views: 945
|
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
Date: 12/31/1969
Views: 800
|
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
Date: 12/31/1969
Views: 617
|
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
To still get the height needed, three pieces of 1/4" strap were cut and will stack under the "L"
Date: 12/31/1969
Views: 1118
|
Painted up
Painted up
Date: 12/31/1969
Views: 5914
|
|
Painted
Painted
Date: 12/31/1969
Views: 952
|
The crossmembers, after their second coat of ZeroRust, this time Black
The crossmembers, after their second coat of ZeroRust, this time Black
Date: 12/31/1969
Views: 956
|
The crossmembers, after their second coat of ZeroRust, this time Black
The crossmembers, after their second coat of ZeroRust, this time Black
Date: 12/31/1969
Views: 2278
|
Crossmember pic courtesy Dan Phariss
Crossmember pic courtesy Dan Phariss
Date: 05/14/2004
Views: 550
|
Flywheel requires a change in pilot bearing for the 5spd
Flywheel requires a change in pilot bearing for the 5spd
Date: 12/31/1969
Views: 1623
|
