|
After clean-up with the pressure washer. 5/2/2004
After clean-up with the pressure washer. 5/2/2004
Date: 12/31/1969
Views: 2798
|
You can see that the parking brake hardware (top) mounts using the 5/8 bolts, but is NOT part of the output shaft bearing retain
You can see that the parking brake hardware (top) mounts using the 5/8 bolts, but is NOT part of the output shaft bearing retainer
Date: 12/31/1969
Views: 1405
|
Muncie PTO PT-3DWN
Muncie PTO PT-3DWN
Date: 12/31/1969
Views: 3375
|
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Date: 12/31/1969
Views: 3517
|
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Date: 12/31/1969
Views: 4070
|
|
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Date: 12/31/1969
Views: 2328
|
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Making my cardboard template for the tailhousing transmission mount bracket using cardboard.
Date: 12/31/1969
Views: 4587
|
Comparison
Comparison
Date: 12/31/1969
Views: 2093
|
Found this hunk of 6" wide 1/4" plate lying in my steel pile.
Found this hunk of 6" wide 1/4" plate lying in my steel pile.
Date: 12/31/1969
Views: 1874
|
DCP_0022.JPG
DCP_0022.JPG
Date: 12/31/1969
Views: 1226
|
|
Bought a 3.5" hole-saw to make the hole for the "bubble" of the cover I'm going around.
Bought a 3.5" hole-saw to make the hole for the "bubble" of the cover I'm going around.
Date: 12/31/1969
Views: 1422
|
Another look at the template
Another look at the template
Date: 12/31/1969
Views: 4087
|
Hinges, and the crossmembers that are waiting for paint.
Hinges, and the crossmembers that are waiting for paint.
Date: 12/31/1969
Views: 4222
|
After making one and a half cuts through the plate to notch the top, the 18V Dewalt Sawzall quit, and I left the corded Milwauke
After making one and a half cuts through the plate to notch the top, the 18V Dewalt Sawzall quit, and I left the corded Milwaukee at home. I only had to use the sawzall because I broke the bandsaw blade earlier this day
Date: 12/31/1969
Views: 4538
|
dcp_0001.jpg
dcp_0001.jpg
Date: 12/31/1969
Views: 69961
|
|
dcp_0002.jpg
dcp_0002.jpg
Date: 12/31/1969
Views: 1821
|
dcp_0003.jpg
dcp_0003.jpg
Date: 12/31/1969
Views: 2207
|
dcp_0004.jpg
dcp_0004.jpg
Date: 12/31/1969
Views: 6641
|
dcp_0005.jpg
dcp_0005.jpg
Date: 12/31/1969
Views: 1291
|
dcp_0006.jpg
dcp_0006.jpg
Date: 12/31/1969
Views: 1200
|
|
dcp_0007.jpg
dcp_0007.jpg
Date: 12/31/1969
Views: 1278
|
dcp_0008.jpg
dcp_0008.jpg
Date: 12/31/1969
Views: 1045
|
dcp_0009.jpg
dcp_0009.jpg
Date: 12/31/1969
Views: 998
|
dcp_0010.jpg
dcp_0010.jpg
Date: 12/31/1969
Views: 990
|
dcp_0011.jpg
dcp_0011.jpg
Date: 12/31/1969
Views: 1085
|
