|
The old drum wheel bearing race was shot and the innre wheel bearing just fell out / fell in, so the hub was peened to try and k
The old drum wheel bearing race was shot and the innre wheel bearing just fell out / fell in, so the hub was peened to try and keep the race in place.
Date: 12/31/1969
Views: 6025
|
peening with the center punch didn't do it, so the air-chisel got the nod.
peening with the center punch didn't do it, so the air-chisel got the nod.
Date: 12/31/1969
Views: 4322
|
Brand new 1985 F150 wheel hub, rotor, races, studs for $42 from PartsAmerica
Brand new 1985 F150 wheel hub, rotor, races, studs for $42 from PartsAmerica
Date: 12/31/1969
Views: 1356
|
Part number for the 1985 F150 wheel hub
Part number for the 1985 F150 wheel hub
Date: 12/31/1969
Views: 3009
|
Box of other stuff for the conversion - new calipers, new pads, new U-joints, wheel seals.
Box of other stuff for the conversion - new calipers, new pads, new U-joints, wheel seals.
Date: 12/31/1969
Views: 1950
|
|
Braided stainless steel brake hoses from BackCountryBinders
Braided stainless steel brake hoses from BackCountryBinders
Date: 12/31/1969
Views: 1566
|
DCP_0002.JPG
DCP_0002.JPG
Date: 12/31/1969
Views: 1547
|
Headliner project with poster-board IHs. Board is 1/8" hardboard from Home Depot ~$10, covered with 3 yards of headliner m
Headliner project with poster-board IHs. Board is 1/8" hardboard from Home Depot ~$10, covered with 3 yards of headliner material ($9/yd)
Date: 12/31/1969
Views: 19914
|
Cardboard IH cut-outs spray-glued to the board.
Cardboard IH cut-outs spray-glued to the board.
Date: 12/31/1969
Views: 4297
|
Covered
Covered
Date: 12/31/1969
Views: 1550
|
|
DCP_0006.JPG
DCP_0006.JPG
Date: 12/31/1969
Views: 1308
|
See the large IH in the center?
See the large IH in the center?
Date: 12/31/1969
Views: 12976
|
See the large IH in the center?
See the large IH in the center?
Date: 12/31/1969
Views: 20946
|
DCP_0009.JPG
DCP_0009.JPG
Date: 12/31/1969
Views: 1613
|
Stock 1979 Scout II disc/drum proportioning valve and lines.
Stock 1979 Scout II disc/drum proportioning valve and lines.
Date: 12/31/1969
Views: 2118
|
|
Stock drum brake 1973 stuff
Stock drum brake 1973 stuff
Date: 12/31/1969
Views: 2889
|
Old brake hose stretched tight thanks to the 4" Triangle lift
Old brake hose stretched tight thanks to the 4" Triangle lift
Date: 12/31/1969
Views: 3542
|
Locking hub removed
Locking hub removed
Date: 12/31/1969
Views: 882
|
Disc prop valve above, drum brake warning light below.
Disc prop valve above, drum brake warning light below.
Date: 12/31/1969
Views: 8452
|
Assorted stub shafts for this project
Assorted stub shafts for this project
Date: 12/31/1969
Views: 1705
|
|
Stubs. Notice 4 different lenghts, three different lengths of 19sp stubs
Stubs. Notice 4 different lenghts, three different lengths of 19sp stubs
Date: 12/31/1969
Views: 7741
|
Stock drum spindle on left, Chevy small-bearing spindle on right
Stock drum spindle on left, Chevy small-bearing spindle on right
Date: 12/31/1969
Views: 4559
|
DCP_0018.JPG
DCP_0018.JPG
Date: 12/31/1969
Views: 1057
|
Chevy stub in Chevy spindle.
Chevy stub in Chevy spindle.
Date: 12/31/1969
Views: 1106
|
too-short stub in Chevy spindle
too-short stub in Chevy spindle
Date: 12/31/1969
Views: 1071
|
